Top Longboard Wheels That Deliver Smooth, Powerful Rides
Want smooth, powerful rides? Try LOOEEL 70 mm 80 A wheels; their hard PU and ABEC‑9 bearings give speed on concrete. Bigfoot’s 76 mm 80 A SHR wheels lock slides tightly, perfect for long downhill runs. Shark’s 72 mm DNA set offers a wine‑glossed grip, great on wet decks. Cloud Ride’s 69 mm 78 A wheels rebound surprisingly; they’re heavy, but they cut stone roads. Bravord’s 70 mm 78 A set is versatile. If you stick around, you’ll see why these tops stand out.
Key Takeaways
- LOOEEL 70 mm 80 A wheels – hard PU, square lips, 608RS Abec‑9 bearings for speed and smooth grip; 1‑yr warranty.
- Bigfoot 76 mm 80 A SHR wheels – offset core, hard urethane, 0.8 lb; slide‑lock, stable downhill glide, no backside crash.
- Shark 72 mm DNA Formula – wave‑pattern PU, transparent emerald, US‑made; excels on rocky roads, wet decks for smooth, powerful rides.
- Cloud Ride 69 mm 78 A – square‑lip, high‑rebound, 78 A PU; aggressive slides yet maintain smooth power across varied surfaces.
- Bruvord 70 mm 78 A – large diameter, affordable US wheels, 78 A PU; balanced commuting, cruising, and downhill performance.
LOOEEL 70mm Longboard Wheels 80A ABEC-9 Bearings
If you’re long‑boarding on rough concrete or uneven asphalt, these 70 mm LOOEEL wheels, 80 A hard polyurethane with pre‑installed ABEC‑9 bearings, will keep you cruising smoothly and confidently. They measure 70 mm in diameter and 51 mm wide, and the frosted finish looks sleek on board. The 608RS ABEC‑9 bearing is already in place, so you can hit the streets right away. With PU that resists wear, you’ll feel a grip while cornering. The package includes four wheels, two riser pads, and all the screws, nuts, and washers you need. Lightweight at 0.82 kg, it’s backed by a year’s warranty, so ride easy.
Best For: riders who want durable, smooth performance on rough pavement and uneven asphalt in urban long‑boarding.
Pros:
- Smooth, powerful traction with 80 A hard polyurethane
- Comes pre‑installed with ABEC‑9 bearings and all screws, nuts, washers, and riser pads
- Lightweight (0.82 kg) and backed by a 1‑year warranty
Cons:
- 80 A hardness can feel too firm for beginners or those seeking a softer ride
- Slightly heavier than some lighter‑weight longboard wheel options
- Limited color or finish options compared to higher‑end lines
- Size Specification:Diameter 70mm, width 51mm,equipped with 608 black ABEC-9 608RS bearing and spacer,bearing inner diameter 8mm,outer diameter 22mm,Bearings and spacers are already installed on the wheel.
- Quality Material:Hardness 80A,wear-resistant solid PU material,can be used for all ground,rough pavement,pavement, smooth concrete or asphalt pavement.Provides soft grip and smoother rolling for cornering.
- Durable bearings:608RS high-speed rotating bearing, sliding without noise,smooth and fast rotating speed,and more durable,which better helps you do Street skills very well.
- Wide Application:suitable for many cruiser board,longboard,mini cruiser,retro skateboard etc.Including the screws, nuts and washers required for installation.
- Package Included:pack of 4 skateboard wheels with bearings and spacer,2 skateboard riser pads,8pcs skateboard hardware/screws,suitable for beginners when playing longboard,cruise board.
Bigfoot Longboard Wheels 76mm 80A SHR Mountain Cruisers
These Bigfoot 80A SHR wheels push your downhill runs to new speeds.
You’ll find each 76 mm wheel offers a 53 mm width, giving you plenty of traction. The 80A Super High Rebound hardness delivers grip and stability at high speed, so you never feel the road’s rough patches. An offset core locks corner grip, creating predictable slide characteristics for sharp turns. Bigfoot’s black urethane build is perfect for slalom, downhill, and fast‑line cruising. Each wheel weighs just 0.8 lbs, so it adds minimal drag while keeping the board responsive. When you hit the trails, these wheels let you command the tree line with confidence. Enjoy smoother rides with reduced impact and enhanced speed.
Best For: riders who crave high‑speed traction for downhill and slalom runs
Pros:
- 80A SHR hardness gives outstanding grip and stability at top speed
- 53 mm width and 76 mm diameter maintain speed while adding cushion on rough terrain
- Offset core provides predictable slides and strong corner grip for sharp turns
Cons:
- Stiff 80A hardness can feel harsh on very rough surfaces
- Larger diameter may require longer wheel wells or more slide space
- Color options are limited to black only kokoa
- Measures 76mm x 53mm with a 80A SHR hardness
- The 80A Super High Rebound (SHR) hardness provides a good grip and stability at high speeds
- The offset core allows the wheels to be able to grip through turns and corners, while providing predictable, controlled slide characteristics
- The Mountain Cruiser is designed for the riders looking to go fast (slalom, downhill)
- 76mm wheels are on the larger end of the spectrum making it easier to maintain top speeds
Shark Wheel 72mm Longboard Cruising Wheels, DNA Formula, Set of 4 Wheels
Shark wheels’ 72 mm DNA Formula offers speedy rides on rocky roads, perfect for adult longboarders craving all‑terrain versatility. These transparent emerald wheels run 72 mm in diameter, crafted from high‑grade polyurethane that resists wear. The unique wave‑pattern surface pushes debris aside, ensuring you maintain speed even on rough decks, ramps, rails, or wet beaches. Made in the USA, these wheels use local materials so you can trust their longevity and performance across seasons. Packaged in a snug 5.63‑by‑5.63‑by‑2.32‑inch box, the set weighs 0.66 kg, keeping your board light. With a 78adna‑P model number and part 1001S72MM, you’ll know you’re buying quality.
Best For: adult longboarders looking for durable, fast, all‑terrain convenience.
Pros:
- 72 mm diameter and wave‑pattern surface keep speed on rough, debris‑heavy surfaces.
- High‑grade polyurethane guarantees long‑lasting wear resistance, even on rocky roads and wet decks.
- Lightweight (0.66 kg) package and U.S. built quality keep your board nimble and trustworthy.
Cons:
- 72 mm size may not suit riders who prefer extremely large or ultra‑small wheels.
- The set’s all‑terrain focus can make them overkill for flat or indoor sessions, adding unnecessary bulk.
- Slightly higher price point for a premium build may not justify the upgrade for casual riders.
- HIGH-PERFORMANCE WHEELS: Our long boards skateboard wheels helps you build and maintain speed on rough terrain or skate ramp. The unique wave pattern of the wheels helps to deflect debris and obstacles, so you can keep on rolling.
Cloud Ride! Wheels Cruiser 69mm 78A Longboard Wheels
Because of its medium‑hard 78A grade, these 69 mm wheels give you balanced traction for carving and high‑speed sliding. Their high‑rebound urethane powers every push, while the square‑lip profile grips turns and still slides smoothly. At 69 mm, they comfortably roll over cracks and rocks, keeping your board stable. Four clear‑blue wheels weigh just 1.45 lb total, so you’ll feel light on the ride. Designed for cruising, freeride, and downhill, they’re durable yet maintain control, making them great for unisex adults who value both speed and sturdiness. They also come with a 90‑day warranty for a stress‑free start to keep you confident.
Best For: adults who want a balanced wheel for carving, cruising, and downhill riding.
Pros:
- High‑rebound urethane offers powerful pushes and quick acceleration.
- Square‑lip profile delivers strong grip in turns while still sliding smoothly.
- Lightweight 1.45 lb pack keeps the board feel airy and responsive.
Cons:
- Medium‑hard 78A can wear faster on aggressive sliding, leaving thicker thene lines.
- Not the softest option for maximum traction on very uneven or cheery surfaces.
- No special anti‑skid patches, so slick‑surface handling relies solely on the wheel’s texture.
- Our Cruiser Wheels were designed to be ideal for carving & cruising but also one heck of a freeride wheel! They measure 69mm in diameter, 78a in hardness & are sold in a set of 4 wheels. The high rebound urethane is well-suited to any type of riding.
- The square-lipped design grips when you need it but can still be pushed out for a smooth slide thanks to characteristics of the urethane itself. These wheels will leave fat thane lines but are surprisingly resilient. Each set weights roughly 1.45 pounds
- These 78a wheels have great grip for cornering & easily roll over cracks, small rocks, & rough surfaces. When sliding, they offer great control, slow you down rapidly, wear quickly, & leave thane lines. Ideal for cruising, carving, freeride & downhill
- Cloud Ride pours quality urethane into every wheel they produce, manufactured to focus on durability with an amazing attention to detail. Leave your mark on the hill with some insane thane under your board & grab your next set of wheels from Cloud Ride
- BEYOND COMPARE: Cloud Ride's full line of wheels compares favorably to products from Orangatang, Sector 9, Hawgs, Powell-Peralta, Blood Orange
70mm 78A PU Mixed-Color Longboard Wheels
For riders seeking speed and stability on any terrain, the 70 mm 78A PU wheels deliver powerful performance. These BRAVORD wheels feature a 70 mm diameter and 51 mm width, built from durable polyurethane and a 78A hardness that balances durability with shock absorption. Packed as a set of four, the vibrant purple‑black tones and embedded branding add visual flair. They excel on commutes, park cruises, and downhill runs, cutting vibration and noise for a smooth ride. With a 91 load index, they handle heavy use, and Amazon’s 30‑day return policy offers easy reassurance. Experience confidence whenever you roll through streets or trails.
Best For: skateboard enthusiasts who crave a balanced blend of speed, stability, and a splash of color for both daily commutes and casual park rides.
Pros:
- Durable 78A PU material with a high 91 load index for long‑lasting performance.
- Spacious 70 mm × 51 mm design delivers smooth, stable handling on varied terrain.
- Vibrant purple‑black mixed‑color finish adds a distinctive visual flair.
Cons:
- Medium hardness may feel less plush on extremely rough surfaces compared to softer wheels.
- Boxed in a set of four; if only one or two wheels needed, extra units may be wasteful.
- No explicit environmental or recyclability certifications provided.
- Premium Materials:Constructed from high-quality polyurethane (PU), our longboard wheels offer exceptional durability and shock absorption. These skate wheels are designed to withstand rigorous use, ensuring a smooth ride for both casual cruising and demanding skating conditions.
- Precision Specifications:Measuring 70mm in diameter and 51mm in width, these longboard wheels are engineered for optimal balance between speed and stability. Their design minimizes vibration and noise, providing a comfortable ride suitable for various longboarding and skateboarding styles.
- Striking Appearance:These longboard wheels feature a vibrant blend of purple and black, creating a bold and stylish look. The colors are designed to remain vibrant over time, ensuring your skateboard wheels stand out on any terrain and make a statement wherever you ride.
- Artistic Design:Our longboard wheels showcase a classic shape enhanced by artistic surface patterns. Each wheel prominently displays our logo and size, combining visual appeal with a cohesive brand identity that adds character to your skateboard wheels.
- Adaptable Performance: Designed for versatility, these longboard wheels excel on a variety of surfaces. Whether you're commuting, cruising in the park, or tackling downhill runs, they provide reliable grip and stability, ensuring a smooth and enjoyable skating experience for all longboard and skateboard enthusiasts.
Frcctre Soft 70mm 4-Pack Longboard Wheels
If you crave seamless cruising on smooth concrete, these 70‑mm Frcctre soft wheels glide effortlessly. You’ll find them in a compact, frosted‑transparent set that fits any longboard or cruiser. Each wheel measures 70 mm in diameter and 51 mm wide, with a 80 A softness that’s perfect for smooth surfaces while still holding grip. The 608 mm ABEC‑9 bearings keep your ride quiet and fast, even around tight corners. The package includes spacers, 2 riser pads, eight screws and nuts, making setup a breeze. Lightweight and effortlessly robust, these wheels let you master early street tricks on asphalt or concrete every night today.
Best For: longboarders and cruiser riders who want a smooth, quiet, and stable ride on concrete or asphalt while practicing early street tricks.
Pros:
- 70 mm diameter with 80 A PU offers a balance of comfort and grip for smooth surfaces.
- 608 mm ABEC‑9 bearings deliver low noise and high speed for quick turns and efficient cruising.
- Includes spacers, riser pads, screws, and nuts for easy, tool‑free installation.
Cons:
- The 70 mm size can be difficult to maneuver in tight or crowded skate parks.
- 80 A softness may hold less grip on very slick or wet concrete compared to harder wheels.
- The set’s 4‑piece configuration may limit options if you prefer a mix of wheel sizes for street and park use.
- Longboard Wheels: Included set of 4 transparent frosted longboard wheels with bearings and spacer, 2 pcs skateboard riser pads, 8pcs screws and nuts
- Specification Details: Hardness 80A. Diameter 70mm, 51mm width, equipped with 608 black ABEC-9 high steel bearings and spacers, which have been installed on wheels
- Premium Quality Material: Wear-resistant durable PU material, will provides great grip and smoother rolling. Suitable for longboard, skateboards, cruiser board
- Durable Bearings: High-speed rotating bearing, sliding without noise, smooth and fast rotating speed, which better helps you do Street skills very well
- Versatile Use: These PU longboard skateboard wheels are perfect for cruising and many early street tricks. They can do well on smooth concrete or asphalt pavement
Orangatang Heat 75mm Downhill Longboard Wheels
These 75‑mm wheels are built for riders who chase high‑speed, tight‑carving downhill runs.
You’ll find each set comes in four durometers—77a, 80a, 83a, and 86a—so you can pick the grip level that matches your slope.
Its sharp square lips give maximum traction, while the ripple‑patterned urethane delivers progressive rebound for smooth, yet grippy slides that keep you planted on steep descents.
The urethane body, with an encapsulated core, supports the lips and secures a buttery‑smooth glide even after long‑distance pushing.
Loaded Jehu V2 bearings give you instant play, and the compact packaging keeps your board hassle‑free during travel.
Ride strong.
Best For: riders who chase high‑speed, tight‑carving downhill runs on steep slopes.
Pros:
- Rugged, square‑lip design gives maximum traction for sharp carving.
- Four durometers (77 a‑86 a) let you fine‑tune grip to match your slope.
- Loaded Jehu V2 bearings and encapsulated urethane deliver buttery‑smooth glide with progressive rebound.
Cons:
- 75 mm diameter limits stability on very long, flat stretches or deep bowls.
- Focused on downhill; not ideal for tricks, flat work, or casual commuting.
- No integrated brake or rim‑wide rubber, which can reduce safety on slick surfaces unless paired with a grip coating.
- VERSATILE LONGBOARDING WHEELS – Designed for maximum speed and grip for hard carving, pumping, downhill skateboard racing, and long-distance pushing. Includes Loaded Jehu V2 bearings with integrated spacers and speedrings.
- FAST AND BALANCED – At 75mm in diameter, the In Heats plow over cracks, rocks, sticks, and the roughest roads.
- MAXIMUM TRACTION – Sharp, square lips provide maximum grip while still sliding smoothly when desired. Rippled urethane pattern provides progressive rebound.
- HAPPY THANE – The original Orangatang urethane formula is fast, smooth, plush, and grippy with a buttery-smooth slide. Now available in four durometers: 77a (blue), 80a (orange), 83a (purple), and 86a (yellow).
- STRONG, SUPPORTIVE CORE – The encapsulated core maintains a smooth ride and supports the lips for excellent traction and crisp slides.
FREEDARE 70mm Longboard Wheels with ABEC-7 Bearings and Spacers(Set of 4)
The FREEDARE 70 mm wheels with ABEC‑7 bearings deliver silky smooth rolls for riders seeking precision and speed.
You’ll notice their 83a polyurethane compound keeps brakes minimal while still snapping up small road bumps effortlessly. The 51‑mm width grants a stable stance even on slick asphalt, and the 70‑mm diameter offers a sweet balance between speed and control. Every wheel comes pre‑installed with high‑steel ABEC‑7 bearings, so you’re ready to conquer skate parks and urban streets straight out of the box. Their subtle yellow color and pocket dot pattern make the set both functional and eye‑catching. Perfect for any rider.
Best For: riders who want smooth, high‐performance longboard wheels for street and skate‑park use.
Pros:
- Pre‑installed high‑steel ABEC‑7 bearings give instant, precise performance.
- 83a polyurethane produces silky‑smooth rolls with minimal braking while tackling bumps.
- 70 mm diameter and 51 mm width balance speed and stability for a stable stance.
Cons:
- Yellow color may clash with some board aesthetics.
- Slightly higher price point compared to budget options.
- Limited spare parts compatibility for future upgrades.
- 70mm diameter x 51mm width;83a durometer polyurethane wheels
- There comes with ABEC-7 high steel bearings and spacers, which have been installed on wheels.
- The pro longboard wheels roll pretty smooth, it's very durable for street skating as well as on skate park terrain.
- The wheels are better for PU material,it rides fast and smooth,you can go over small road pebbles with ease.
- I think you would like to dress up your skateboard,the delicate design with dot pattern enhanced your wheels all entire series interest.
PATIKIL 78A Longboard Wheels ABEC-9 Bearings
Feel the raw speed with PATIKIL 78A wheels—designed for cruisers who tackle gravel, speed bumps, and smooth streets effortlessly. The 70 × 51 mm soft polyurethane wheel grips well, while the 78A rating keeps it comfortable on jagged surfaces. ABEC‑9 bearings inside each 22 × 8 mm housing provide smooth rotation and high speed, letting you push harder. Wide contact area eases obstacles, while high rebound offers tighter control during tricks or city cruising. You assemble by sliding the wheel between spacers, securing it with side nuts; the included tool guarantees a flush fit. Compact set fits your board, delivering instant, smooth power and stability.
Best For: riders who want smooth, durable wheels that handle gravel, speed bumps, and street pavement while offering high-speed precision and aerodynamic control.
Pros:
- Soft PU 78 A surface delivers excellent comfort on rough terrain and reduces impact fatigue.
- ABEC‑9 bearings provide precise, high‑speed rotation for faster rides and tighter handling.
- Wide 70 × 51 mm contact area eases obstacle navigation and improves stability during tricks.
Cons:
- Soft PU may wear faster than harder compounds on abrasive surfaces.
- ABEC‑9 bearings can be overkill for casual riders, adding unnecessary cost.
- 78 A softness may reduce initial grip on very smooth or slick roads.
- Color: Blue; Material: PU; Hardness: 78A; Bearing Size: 22 x 8mm / 0.87 x 0.31 inch(OD*ID); Wheel Size: 70 x 51mm / 2.76 x 2.01 inch(OD*W); Package List: 4 x Longboard Wheels and Bearings Set
- Advantage: The wheels and bearings are mounted together, reducing your installation time. Street wheel has a wide contact surface with the ground and has a strong ability to pass obstacles. Skateboard accessories can smoothly pass through various roads. Skateboard wheels have a good rebound, making them faster and more stable in grip, giving you good control for mobility. The Skateboard hardware tool is suitable for park or street skateboarding, asphalt roads, and other places.
- Instruction: 1. Install the assembled wheel on the skateboard bridge according to "spacer+wheel+spacer+side nut". 2. Use a tool to twist the side nut until it is flush with the skateboard bridge
- Application: Skateboard hardware sets are used for the modification of indoor and outdoor sports enthusiasts' skateboard and longboard or the maintenance and replacement of accessories.
- Note: Pay attention to the size of the wheels according to your need before ordering.
Orangatang 80mm Downhill Longboard Wheels (Set of 4)
If you chase speed, you’ll love these 80 mm wheels, engineered for downhill racing and carving with sharp square lips. You’ll notice the 80 mm diameter gives instant surge and keeps you cruising over cracks, rocks, and sticks. Sharp, square lips lock in grip, sliding smoothly. Eight Jehu V2 bearings keep rotation crisp, no spacers needed. The 46 mm core lightens the load, so acceleration feels instant. Choose from 77a (blue), 80a (orange), or 83a (purple), each offering a grippy feel for long distance, pumping, or carving. Boxed in a 7.48×7.32×3.62‑inch pack, it debuted in September 2017 and fits longboards. Built to last forever.
Best For: downhill riders who value instant speed, aggressive carving, and long‑distance grip on rough terrain.
Pros:
- Instantly high speed from the 80 mm diameter boosts acceleration.
- Square, sharp lips keep maximum grip while sliding smoothly.
- Load Jehu V2 bearings give crisp rotation without needing spacers.
Cons:
- The large diameter can make the wheels feel heavy and less nimble for tight turns.
- Their aggressive grip may be too stiff for casual cruising or boarders who prefer a softer feel.
- Few color options and the specific diameter limit compatibility to long‑board setups only.
- DOWNHILL LONGBOARDING WHEELS – Designed for maximum speed and grip for downhill skateboard racing, hard carving, pumping, and long-distance pushing.
- ROLL OVER ANYTHING – With a large 80mm diameter, the Kegels roll with breakneck speed and plow over cracks, rocks, sticks, and the roughest roads.
- MAXIMUM TRACTION – Sharp, square lips provide maximum grip while still sliding smoothly when desired.
- HAPPY THANE – The original Orangatang urethane formula is smooth, plush, and grippy with a buttery-smooth slide.
- LARGE, SUPPORTIVE CORE – The fully exposed 46mm core reduces weight while providing quick acceleration and crisp slides.
Orangatang Stimulus 70 mm Freeride Longboard Skateboard Wheels (Set of 4)
For riders craving buttery slides, the Orangatang Stimulus 70 mm wheels are a game changer. They feel plush yet firm, letting you glide through tricks with buttery‑smooth edges. Each wheel comes with Jehu V2 bearings, speedrings, and spacers, so you can set up for maximum speed or control. The rounded lips and stone‑ground surfaces keep your rides predictable, while the encapsulated core preserves wear for long life. With four durometers—77a, 80a, 83a, and 86a—you’ll pick your groove, whether dancing, freeriding, or freestyle. They also balance well on any deck, and the set’s limited lifetime warranty gives you peace of mind.
Best For: riders craving buttery, predictable slides for freestyle, dancing, or freeride tricks on a longboard or skateboard, especially those who appreciate a versatile range of durometers and all‑in‑one wheel kits.
Pros:
- Smooth, stone‑ground surfaces and rounded lips provide buttery‑smooth traction and predictable slides.
- Built‑in Jehu V2 bearings, speedrings, and spacers eliminate extra setup steps for instant speed or control.
- Encapsulated PU core extends wear life and keeps the ride firm yet plush across multiple durometers.
Cons:
- 70 mm size may be too small for larger decks or very high‑speed carving.
- Limited to the four available durometers; no options for ultra‑soft or ultra‑hard wheels.
- Dependence on Pocket‑style bearings means you may need to upgrade or replace them as they wear.
- VERSATILE FREERIDE WHEELS – The Orangatang Stimulus is the perfect mid-sized longboard wheel for freestyle tricks, dancing, and freeriding.
- PERFECTLY SIZED – At 70mm in diameter, the Stimulus is large enough to carry plenty of speed and roll over debris while still being light and quick for tricks and slides.
- SMOOTH SLIDES – Rounded lips and a stone-ground contact patch ensure smooth, predictable slides right out of the box and throughout the life of the wheel.
- HAPPY THANE – The original Orangatang urethane formula is smooth, plush, and grippy with a buttery-smooth slide.
- STRONG, SUPPORTIVE CORE – The encapsulated core maintains a smooth ride and supports the lips for crisp slides and even wear.
ANTWHEEL All-Terrain 100mm Skateboard Wheels
When you need off‑road freedom, you’ll shred anywhere with these 100 mm ANTWHEEL all‑terrain wheels. Their 100 mm diameter and 65 mm width give you a stable platform on pavement, packed dirt, or short grass. Made from 78 A urethane, they offer high‑rebound and speed‑optimized performance, so your longboard stays responsive even on rough terrain. The wheels are lightweight at 2 kg and come in a durable all‑terrain design that fits both traditional longboard quivers and electric skateboards. Delivered since January 1 2024, they’re a reliable upgrade for any rider craving versatility. With a all‑terrain color, its part no. ANTWHEEL and ASIN B09FLYZJ48 make tracking easy.
Best For: adventurous longboarders and electric skateboard riders who need a single set of wheels that delivers stable, speed‑optimized performance on pavement, packed dirt, and short grass.
Pros:
- Large 100 mm diameter and 65 mm width give a stable platform and excellent traction on varied terrain.
- 78 A urethane construction provides high rebound for responsive, energy‑efficient rides even on rough surfaces.
- Versatile fit for both traditional longboard quivers and electric skateboards, making it a convenient one‑stop upgrade.
Cons:
- At 2 kg, the wheels are heavier than many street‑focused wheels, potentially adding drag on smooth rails.
- Limited color selection (single all‑terrain color) may not appeal to riders looking for a more personalized look.
- New release (since January 1 2024) means limited long‑term durability data and fewer user reviews compared to established models.
- 100mm x 65mm all-terrain longboard wheels
- Cast with 78a super-high-rebound urethane for unparalleled speed
- Perfect addition to any long boarder's quiver
- Add off-road capabilities to your existing longboards
- Ride sidewalks and pavement hard packed dirt or short grass
Longboard Wheels 70mm 82A PU, NJ-70, Professional Cruiser Wheels– Set of 4
The 70 mm BRAVORD wheels bring lightning‑fast speed and bone‑shattering grip for seasoned cruiser riders. You’ll appreciate the 51 mm width, which keeps traction high without feeling sluggish on streets or parks. With an 82A hardness, the PU cores offer a bite that survives impacts and daily wear. Their ninja‑shuriken design and frosted finish give a sleek look while boosting low‑roll resistance. You’ll glide smoothly over streets, parks, and obstacles—perfect for cruising, carving, slashing, or sliding. Each set comes in black or green, weighs 0.63 kg total, and ships in a secure round note box for protection. Warranty support included, hassle‑free service.
Best For: seasoned longboard cruisers looking for high speed, grip, and durability on street, park, and mixed terrain rides.
Pros:
- 70 mm size balanced for smooth cruising, carving, and sliding while maintaining speed.
- 82A PU cores offer strong bite and excellent impact resistance for daily wear.
- Ninja‑shuriken, frosted design reduces roll resistance and adds a sleek, low‑profile look.
Cons:
- Harder PU may feel less forgiving on rough or uneven surfaces.
- 70 mm diameter can be too large for tight park slides intended for beginner riders.
- Lack of disclosed price information can make budgeting or comparison difficult.
- HIGH PERFORMANCE: BRAVORD Ninja-70 skateboard wheels are made by 82A polyurethane material. The size of wheel is 70mm (diameter) * 51mm (width)-Set of 4; The size & hardness of NJ-70 are perfect for an all-around longboard, cruising, carving, slashing and sliding.
- IDEAS of DESIGN: The pattern on wheels gather ideas from Ninjas’ Shurikens, which symbolizes flexibility, light weight and smooth riding on the street or in skate park. Meanwhile we provide Ninja black and green for customers to choose according to their preference.
- EXCELLENT SLIP RESISTANCE: As professional street wheels for longboards and cruisers, the design of frosted surface provide excellent ability of obstacle surmounting and adaptability of exploration.
- COMFY SMOOTH + STRONG GRIP+ FAST SPEED = NINJA 70.As pro longboard wheels, it gives riders a really good control of skateboard, and it works perfectly with different skateboard trucks and skateboard bearings.
- PROFESSIONAL SERVICE: If you were not satisfied with our products after you received the item, then feel free to contact us and we will provide professional service until solve your problems.So be confidently to have a set of BRAVORD NINJA-70 without any worry, and it is a pack of 4 for sure.
Fireball Beast 76mm Longboard Wheels 87A
If you’re chasing smooth rides over rough ground, these 76 mm Fireball Beast wheels glide, keeping speed without losing grip.
These four wheels deliver 76 mm diameters and a 65 mm width that give you a 50 mm contact patch. The 87‑A urethane feels crisp, while the 37 % offset core keeps you sliding without slipping. The core’s bevels balance traction for tight turns, and the slide‑prepped surface locks in flat‑liner slides. Made in a California factory, each set is under 1.01 kg so you won’t feel extra load. Ideal for cruising, freeride, or downhill; just rotate early to extend life and keep speed steady.
Best For: experienced riders who crave smooth, high‑speed glides over rugged outdoor terrain.
Pros:
- 87A urethane offers a crisp, durable feel on rocks, cracks, and debris.
- 37 % offset core with beveled edges balances slide‑to‑grip for aggressive carving.
- Lightweight 1.01 kg wheel set preserves speed and reduces fatigue.
Cons:
- Surface can wear relatively quickly if not slide‑prepped or rotated early.
- Requires routine rotation to prevent coning, which can shorten overall life.
- Slightly higher cost compared to smaller‑diameter wheels.
- DESIGNED FOR DOWNHILL LONGBOARDS SKATEBOARDS & CRUISERS - 76mm of USA Made ‘R-Type’ Formula, designed and manufactured in California. The unique ‘Race’ high-rebound polyurethane formula provides a fast and smooth riding experience
- CRUISE OVER ROCKS, CRACKS & DEBRIS smoothly and quickly with the 87a Urethane. Perfect for casual cruising freeride or downhill skateboarding. Don't let stones or sticks slow you down as you are riding your board
- SLIP & GRIP - Beveled edges combined with an offset core provide the perfect slip to grip ratio. This allows for the proper amount of grip when cornering and carving, while the SlidePrepped() surface allows you to break into a slide and create clean lines when you feel the urge. PRO TIP: rotate the wheels at first sign of coning to improve the lifespan of the wheel
- USA MADE - We make all our wheels in our Local California facility for full control over the manufacturing process. We want you to get the best wheels on the market and the best price possible
- 76MM SET OF 4 WHEELS - Diameter = 76mm, Width = 65mm, Durometer = 87a, CP = 50mm contact patch, Core = Offset (37%). Check out our storefront for more gear
TGM Bigfoot Longboard Wheels 76MM 80A Translucent Purple
These 76 mm, 80A wheels deliver ultimate high‑speed grip for serious downhill and slalom riders. TGM Skateboards’ Bigfoot Longboard Wheels, part BF‑76MC‑TPUR, come in a translucent purple. Built from hard 80A urethane, they keep traction even at velocities that test most wheels. The offset core design sharpens turns, letting you execute tight swerve sequences without sacrificing stability. With a 53 mm rim and 76 mm rim diameter, you’ll get a balance of surface area for rolls and a 1.5 lb build that keeps your board nimble. These wheels fit any longboard geometry and thrive easily from spring through smooth autumn.
Best For: Serious long‑boarders who demand top‑speed grip for downhill, slalom, and mountain cruiser sessions.
Pros:
- Ultra‑hard 80A urethane delivers exceptional traction at high velocities.
- Offset core design sharpens turns, offering predictable, controlled slides.
- Lightweight 1.5 lb build keeps the board nimble while maintaining sturdy performance.
Cons:
- High hardness may feel too abrasive on rough or uneven surfaces.
- Limited color options; only translucent purple available.
- Best suited for experienced riders; may be challenging for beginners.
- Measures 76mm x 53mm with a 80A SHR hardness
- The 80A Super High Rebound (SHR) hardness provides a good grip and stability at high speeds
- The offset core allows the wheels to be able to grip through turns and corners, while providing predictable, controlled slide characteristics
- The Mountain Cruiser is designed for the riders looking to go fast (slalom, downhill)
- 76mm wheels are on the larger end of the spectrum making it easier to maintain top speeds
Factors to Consider When Choosing Longboard Wheels
You’ll want to match a wheel’s diameter and width to your board and riding style, as these dimensions set your speed and stability. Choose the right hardness and grip for the terrain, and make sure the bearings are high‑quality to keep your rides smooth and fast. Keep an eye on the surface pattern, weight, and overall performance so the wheels fit your specific skating needs.
Diameter & Width
Size matters when picking longboard wheels, because each dimension changes how your board feels and performs. Larger diameters—75 mm to 90 mm—boost speed and let you glide over bumps, while 70 mm to 75 mm keep your center of gravity lower for sharp carving turns. Wider wheels (51 mm–65 mm) expand the contact patch, giving better traction on rough pavement and cutting wobble, but they add weight and can slow acceleration. The rim ratio—width divided by diameter—guides handling: tight ratios favor street tricks, looser ratios favor cruiser glide. If you chase speed, go 70 mm × 70 mm for resistance; board better in 90 mm × 65 mm for comfort and durability. By tailoring diameter and width to your terrain and riding style, you’ll fine‑tune the balance between handling and effortless cruising. Setup shifts your board’s feel, experiment.
Hardness & Grip
Because the durometer dictates both grip and shock absorption, picking the right hardness is key to matching your riding style. If you cruise on city streets, 78 A wheels give you solid stability and smooth rides even on bumpy roads. Downhill riders, however, prefer 80 A or higher; those inches of hardness translate to stronger slide control and better traction on slick surfaces. Softer wheels up to 75 A absorb vibrations but let you skitter on uneven pavement, especially at speed. Harder wheels above 81 A keep pace over long distances, yet they feel harsher on cracks and cut corners sharp, so choose wisely based on how aggressively you push. By experimenting with a few wheel sets, you’ll refine exact hardness for your commute, races, or relaxed rides, steady and stay.
Bearing Quality
What factors decide whether a bearing will keep your longboard wheels turning smoothly? The ABEC rating guides you: an ABEC‑9 bearing offers tighter tolerances and fewer micro‑shifts, which is essential when you ramp up speed. For universal fit, 608RS bearings—8 mm inside, 22 mm outside—mount on almost any truck and resist overload. Look for metal‑on‑metal construction paired with a self‑lubricating compound; this combo cuts friction, keeps noise down, and extends durability. Bearings with spacers lock alignment, so you avoid wobble and premature wear. Finally, precision steel races and rollers let rings spin up to 6000 RPM while still handling rough terrain—exactly what a high‑performance rider needs. Choosing high‑quality bearings also protects your trucks from premature wear and saves you the cost of replacement down the road.
Surface Pattern
When you’re aiming for the right mix of speed and slide, the surface pattern of your longboard wheels is key. A square‑lip profile expands the wheel’s front‑ and back‑contact area, giving you stronger grip in turns while cutting friction that would otherwise tame slide control. Wave‑or rib‑patterns scatter debris and water, keeping traction steady on rough pavement and preventing lock‑ups. If you crave pure speed on flat roads, rim‑only designs offer a slick rolling surface but sacrifice slide precision on technical terrain. Wheels with offset cores and square lips shrink the contact patch during cornering, making slide initiation more predictable for carving. Upper‑side textures like veining boost acceleration on flats, still letting you slice moderate slides. Choose wisely, and your board responds instantly today.
Weight & Performance
Choosing wheel weight shapes your board’s dynamics. Heavier wheels, around 0.75‑1.0 lb (340‑450 g) each, drop rotational inertia, letting you maintain momentum on rough terrain but slowing acceleration and making turns feel sluggish. Lighter wheels, roughly 0.5‑0.7 lb (220‑310 g), boost uphill, down‑hill speed, and sharp acceleration, yet drop stability on bumps. Every 10 % increase in set weight pushes your torque demand up 10‑15 %, noticeably affecting uphill effort. Pairing wheels under one pound with ABEC‑9 bearings cuts friction, keeps bearings cooler, and unleashes higher top speeds. Heavier wheels also store more kinetic energy, demanding stronger braking and tighter body positioning to keep deceleration under control. Overall, choosing the balance between wheel weight and ride style lets you fine‑tune performance to match your terrain, skill level, and desired speed.
Frequently Asked Questions
How Often Should I Replace My Longboard Wheels?
You’ll want to replace your longboard wheels every 1,000 to 2,000 miles, depending on usage and terrain. Keep an eye on wear: a smooth, firm feel indicates good life; a clogged, squeaky sensation signals a deadline. If you ride daily on rough pavement, just a thousand miles may be enough. For weekend cruising, a couple of thousand miles keep your ride fresh and your board stays balanced for better performance.
Can I Use Off‑Road Wheels on a Street Longboard?
Imagine your street ride mirroring a rugged hike—off‑road wheels fit, but the road feels like a new adventure. You can use off‑road wheels on a street longboard, and they’ll stay tacky on asphalt. However, their softer cores create more rolling resistance, so turns will feel looser. If you crave speed and smooth glides, switch to firm, high‑durometer street wheels, and keep your board light as a breeze everywhere away today.
Do Softer Durometer Wheels Affect Traction on Slick Surfaces?
Softer durometer wheels dampen traction on slick surfaces. Because they compress more, the contact patch is smaller and the rubber behaves like a cushion, which lowers grip. That means you’ll feel more sliding, especially in rain or on wet pavement. If you need firm footing, choose a harder wheel or one with a bumpy polymer core. However, softer wheels excel in smooth cruising and reduce noise across rough asphalt daily.
What’s the Difference Between ABS and PU Wheels?
Like a trusty steed versus a quiet hawk, ABS wheels feel like steel‑coated rubber, heavier, robust, and great for high speed. PU wheels weigh less, glide smoother, and handle bruising better. ABS’s higher durometer offers durability but sacrifices cushioning. PU doesn’t last as long, yet it excels on rough surfaces, absorbs shock. So pick ABS for raw power, PU for smooth, cushioned cruising on your everyday rides, and feel today.
Are There Legal Restrictions on Wheel Size for Public Use?
Yes, many cities regulate personal mobility device wheels, so you’ll usually find limits on diameter. In most places, wheels larger than 60 mm (about 2.4 in) are banned on sidewalks and parks. Wheels between 60 mm and 70 mm typically pass street‑use rules, while anything above 70 mm often requires a license or special permit. Counties allow up to 75 mm if the board has a lock and reflective strip, but check codes because enforcement varies.
Conclusion
You’ve now seen the wheel lineup that turns every grind into a glide. These tops were engineered to keep the deck humming, from urban streets to mogul‑filled parks. Whether you crave steady traction or sharp acceleration, there’s a wheel size to match your ride style. Just pick the right pair, slide them onto your board, and feel the difference—your board will feel like it’s riding on air and everyone will marvel in every session.
longboard wheels, Smooth Ride, speed wheels
